# FreeBSD Manual Pages

r.solute.transport(1) GRASS GIS User's Manual r.solute.transport(1)NAMEr.solute.transport- Numerical calculation program for transient, con- fined and unconfined solute transport in two dimensionsKEYWORDSraster, hydrology, solute transportSYNOPSISr.solute.transportr.solute.transport--helpr.solute.transport[-fc]c=namephead=namehc_x=namehc_y=namesta-tus=namediff_x=namediff_y=name[q=name] [cin=name]cs=namerd=namenf=nametop=namebottom=nameoutput=name[vx=name] [vy=name]dtime=float[maxit=integer] [error=float] [solver=name] [re-lax=float] [al=float] [at=float] [loops=float] [stab=string] [--overwrite] [--help] [--verbose] [--quiet] [--ui]Flags:-fUse a full filled quadratic linear equation system, default is a sparse linear equation system.-cUse the Courant-Friedrichs-Lewy criteria for time step calculation--overwriteAllow output files to overwrite existing files--helpPrint usage summary--verboseVerbose module output--quietQuiet module output--uiForce launching GUI dialogParameters:c=nameA[required]The initial concentration in [kg/m^3]phead=nameA[required]The piezometric head in [m]hc_x=nameA[required]The x-part of the hydraulic conductivity tensor in [m/s]hc_y=nameA[required]The y-part of the hydraulic conductivity tensor in [m/s]status=nameA[required]The status for each cell, = 0 - inactive cell, 1 - active cell, 2 - dirichlet- and 3 - transfer boundary conditiondiff_x=nameA[required]The x-part of the diffusion tensor in [m^2/s]diff_y=nameA[required]The y-part of the diffusion tensor in [m^2/s]q=nameGroundwater sources and sinks in [m^3/s]cin=nameConcentration sources and sinks bounded to a water source or sink in [kg/s]cs=nameA[required]Concentration of inner sources and inner sinks in [kg/s] (i.e. a chemical reaction)rd=nameA[required]Retardation factor [-]nf=nameA[required]Effective porosity [-]top=nameA[required]Top surface of the aquifer in [m]bottom=nameA[required]Bottom surface of the aquifer in [m]output=nameA[required]The resulting concentration of the numerical solute transport cal- culation will be written to this map. [kg/m^3]vx=nameCalculate and store the groundwater filter velocity vector part in x direction [m/s]vy=nameCalculate and store the groundwater filter velocity vector part in y direction [m/s]dtime=floatA[required]The calculation time in seconds Default:86400maxit=integerMaximum number of iteration used to solve the linear equation sys- tem Default:10000error=floatError break criteria for iterative solver Default:0.000001solver=nameThe type of solver which should solve the linear equation system Options:gauss,lu,jacobi,sor,bicgstabDefault:bicgstabrelax=floatThe relaxation parameter used by the jacobi and sor solver for speedup or stabilizing Default:1al=floatThe longditudinal dispersivity length. [m] Default:0.0at=floatThe transversal dispersivity length. [m] Default:0.0loops=floatUse this number of time loops if the CFL flag is off. The timestep will become dt/loops. Default:1stab=stringSet the flow stabilizing scheme (full or exponential upwinding). Options:full,expDefault:fullDESCRIPTIONThis numerical program calculates numerical implicit transient and steady state solute transport in porous media in the saturated zone of an aquifer. The computation is based on raster maps and the current re- gion settings. All initial- and boundary-conditions must be provided as raster maps. The unit in the location must be meters. This module is sensitive to mask settings. All cells which are outside the mask are ignored and handled as no flow boundaries. This module calculates the concentration of the solution and optional the velocity field, based on the hydraulic conductivity, the effective porosity and the initial piecometric heads. The vector components can be visualized with paraview if they are exported with r.out.vtk. Use r.gwflow to compute the piezometric heights of the aquifer. The piezometric heights and the hydraulic conductivity are used to compute the flow direction and the mean velocity of the groundwater. This is the base of the solute transport computation. The solute transport will always be calculated transient. For stady state computation set the timestep to a large number (billions of sec- onds). To reduce the numerical dispersion, which is a consequence of the con- vection term and the finite volume discretization, you can use small time steps and choose between full and exponential upwinding.NOTESThe solute transport calculation is based on a diffusion/convection partial differential equation and a numerical implicit finite volume discretization. Specific for this kind of differential equation is the combination of a diffusion/dispersion term and a convection term. The discretization results in an unsymmetric linear equation system in form ofAx=b, which must be solved. The solute transport partial differen- tial equation is of the following form: (dc/dt)*R = div ( D grad c - uc) + cs -q/nf(c - c_in)oc -- the concentration [kg/m^3]ou -- vector of mean groundwater flow velocityodt -- the time step for transient calculation in seconds [s]oR -- the linear retardation coefficient [-]oD -- the diffusion and dispersion tensor [m^2/s]ocs -- inner concentration sources/sinks [kg/m^3]oc_in -- the solute concentration of influent water [kg/m^3]oq -- inner well sources/sinks [m^3/s]onf -- the effective porosity [-] Three different boundary conditions are implemented, the Dirichlet, Transmission and Neumann conditions. The calculation and boundary sta- tus of single cells can be set with the status map. The following states are supportet:o0 == inactive - the cell with status 0 will not be calculated, active cells will have a no flow boundary to an inactive cello1 == active - this cell is used for sloute transport calcula- tion, inner sources can be defined for those cellso2 == Dirichlet - cells of this type will have a fixed concen- tration value which do not change over timeo3 == Transmission - cells of this type should be placed on out-flow boundaries to assure the flow of the solute stream out Note that all required raster maps are read into main memory. Addition- ally the linear equation system will be allocated, so the memory con- sumption of this module rapidely grow with the size of the input maps. The resulting linear equation systemAx=bcan be solved with several solvers. Several iterative solvers with unsymmetric sparse and qua- dratic matrices support are implemented. The jacobi method, the Gauss-Seidel method and the biconjugate gradients-stabilized (bicgstab) method. Additionally a direct Gauss solver and LU solver are avail- able. Those direct solvers only work with quadratic matrices, so be careful using them with large maps (maps of size 10.000 cells will need more than one gigabyte of ram). Always prefer a sparse matrix solver.EXAMPLEUse this small python script to create a working groundwater flow / solute transport area and data. Make sure you are not in a lat/lon projection. #!/usr/bin/env python3 # This is an example script how groundwater flow and solute transport are # computed within grass import sys import os import grass.script as grass # Overwrite existing maps grass.run_command("g.gisenv", set="OVERWRITE=1") grass.message(_("Set the region")) # The area is 200m x 100m with a cell size of 1m x 1m grass.run_command("g.region", res=1, res3=1, t=10, b=0, n=100, s=0, w=0, e=200) grass.run_command("r.mapcalc", expression="phead = if(col() == 1 , 50, 40)") grass.run_command("r.mapcalc", expression="phead = if(col() ==200 , 45 + row()/40, phead)") grass.run_command("r.mapcalc", expression="status = if(col() == 1 || col() == 200 , 2, 1)") grass.run_command("r.mapcalc", expression="well = if((row() == 50 && col() == 175) || (row() == 10 && col() == 135) , -0.001, 0)") grass.run_command("r.mapcalc", expression="hydcond = 0.00005") grass.run_command("r.mapcalc", expression="recharge = 0") grass.run_command("r.mapcalc", expression="top_conf = 20") grass.run_command("r.mapcalc", expression="bottom = 0") grass.run_command("r.mapcalc", expression="poros = 0.17") grass.run_command("r.mapcalc", expression="syield = 0.0001") grass.run_command("r.mapcalc", expression="null = 0.0") grass.message(_("Compute a steady state groundwater flow")) grass.run_command("r.gwflow", solver="cg", top="top_conf", bottom="bottom", phead="phead",\ status="status", hc_x="hydcond", hc_y="hydcond", q="well", s="syield",\ recharge="recharge", output="gwresult_conf", dt=8640000000000, type="confined") grass.message(_("generate the transport data")) grass.run_command("r.mapcalc", expression="c = if(col() == 15 && row() == 75 , 500.0, 0.0)") grass.run_command("r.mapcalc", expression="cs = if(col() == 15 && row() == 75 , 0.0, 0.0)") grass.run_command("r.mapcalc", expression="tstatus = if(col() == 1 || col() == 200 , 3, 1)") grass.run_command("r.mapcalc", expression="diff = 0.0000001") grass.run_command("r.mapcalc", expression="R = 1.0") # Compute the initial state grass.run_command("r.solute.transport", solver="bicgstab", top="top_conf",\ bottom="bottom", phead="gwresult_conf", status="tstatus", hc_x="hydcond", hc_y="hydcond",\ rd="R", cs="cs", q="well", nf="poros", output="stresult_conf_0", dt=3600, diff_x="diff",\ diff_y="diff", c="c", al=0.1, at=0.01) # Compute the solute transport for 300 days in 10 day steps for dt in range(30): grass.run_command("r.solute.transport", solver="bicgstab", top="top_conf",\ bottom="bottom", phead="gwresult_conf", status="tstatus", hc_x="hydcond", hc_y="hydcond",\ rd="R", cs="cs", q="well", nf="poros", output="stresult_conf_" + str(dt + 1), dt=864000, diff_x="diff",\ diff_y="diff", c="stresult_conf_" + str(dt), al=0.1, at=0.01)SEE ALSOr.gwflowr3.gwflowr.out.vtkAUTHORSA<paragraph>ren Gebbert This work is based on the Diploma Thesis of SA<paragraph>ren Gebbert available here at Technical University Berlin in Germany.SOURCE CODEAvailable at: r.solute.transport source code (history) Main index | Raster index | Topics index | Keywords index | Graphical index | Full indexA(C) 2003-2020 GRASS Development Team, GRASS GIS 7.8.5 Reference Manual GRASS 7.8.5 r.solute.transport(1)

NAME | KEYWORDS | SYNOPSIS | DESCRIPTION | NOTES | EXAMPLE | SEE ALSO | AUTHOR | SOURCE CODE

Want to link to this manual page? Use this URL:

<https://www.freebsd.org/cgi/man.cgi?query=r.solute.transport&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>